We have a complete inventory of DMI Marine (Datamarine® compatible) parts and accessories.  Check the part and picture below. More parts in stock, call for information.

Please telephone, email, or fax your order to us at the number or email address below (please note the email is not secured) We accept all major credit cards for payment. All orders will be sent via UPS ground service unless otherwise specified. All prices are plus shipping/handling fee.

For round COVERS only please email your name, address and telephone number along with the quantity of covers. We will mail you the covers along with a SASE. Once you receive the covers just place a check in the envelope for the full amount and drop it in the mail.      (SASE= Self Addressed Stamped Envelope. Outside USA and/or over 6 covers require a credit card  to process order)

PRODUCTS
  • PHS Phoenix Speed - $499.00 (plus sensor)
  • PHS Phoenix Depth - $499.00 (plus sensor*)

    * MUST be NMEA active depth transducer. See list below

    Miscellaneous Parts

  • Round 5" Covers - $5.00 (See above for ordering information)
  • Switch boot Covers  - $8.00
  • P-6, 6 paddle replacement Paddlewheel Kits -  $25.00
  • P-4, 4 paddle replacement Paddlewheel Kits - $30.00

     
    Speed Sensor Replacement Cores

  • SST-109  Exact replacement for the SX-160, STX-20 -  $120.00
  • SST-109N Nylon Thru hull, Everything for complete installation $150.00
  • SST-109B Bronze Thru Hull, Everything for complete installation $225.00
  • SX-120 speed w/10'cable and female BNC connector * no re-wiring required* -   $130.00
  • AST-2N Nylon Thru Hull w/water valve, everything for complete installation $175.00
  • AST-2B Bronze Thru Hull w/water valve, everything for complete installation $250.00
  • ASTC-200 speed/temp core replacement for AST-2N or B   $130.00


    Transducers
  • Thru hull fitting, nylon - (pin style)$20.00  Bronze - ($85)   Dummy plug -  $15.00
  • DMI ADX-210 (200kHZ) nylon thru hull, Screw Cap Style -  $160.00  (replaces DX-111)
  • DMI ADX-215 (200kHZ) bronze thru hull, Screw cap style - $235.00 (replaces DX112)
  • DMI DX-204 (200kHZ) -  $195.00
  • (fairing block F-204) -  $52.00
  • DMI DX-119 (120kHZ) -  $320.00
  • (fairing block F-119) -  $52.00
  • DMI DX-300 (120kHZ) -  $320.00
  • DMI X-710 (120kHZ) Bronze stem style for 3500 or 3001 -  $195.00

    Active Transducers for Phoenix PHD

  • DT800N* - Depth/Temp Nylon low profile, NMEA 0183 - $250.00
  • DT800B* - Depth/Temp Bronze low profile, NMEA 0183 - $310.00
  • DST800N* - Depth/Temp/Speed Nylon low profile, NMEA 0183 - $270.00
  • DST800B* - Depth/Temp/Speed Bronze low profile, NMEA 0183 - $320.00
  • LS122 (Bronze stem w/fairing block) NMEA 0183 - $420.00
  • TDT66 (transom mount Depth/Temp) NMEA 0183 - $250.00
  • TDTS66 (transom mount Depth/Temp/Speed) NMEA 0183 - $270.00

    Masthead Unit
  • DMI-MHU  Replacement MastHead Unit  -  No Longer Available. Repairs only.
    Pre-made Masthead Cables with connector
  • 80 foot -     $150.00
  • 120 foot -    $200.00
  • Ask about longer length cables

    Masthead Accessories

  • Wind Cups  - $25.00
  • Wind Vane  - $97.00
  • Fin  -  $20.00
  • Masthead bracket -  $50.00


     

    ALL Prices subject to change without notice.




    DMI Marine, Inc.
    18 Commerce Park Road
    Pocasset, Ma 02559

    main phone number: 508-564-7491
    fax number: 508-564-7497
    email: dmi@dmimarine.com

    		•